STYLE 2236

Flexible Graphite with Inconel Wire, Low Emission

Description and Application

Teadit® 2236 valve packing is self-lubrificating, non-hardening, dimentionally stabe and resistant to gases and fluids as well as heat, pressure and chemicals. It's high temperature flexible graphite and Inconel® filament jacket affords mechanical stability while the advanced construction provides leakage control and high integrity in steam service. Due to its physical properties and ability to minimize friction. Teadit ® Style 2236 is ideal for valves and can be used within a broad range of applications.

  • Certified Low-Leakage Packing Technology
  • TA-Luft approved
  • Suitable to VOC and VHAP emissions regulation
  • Environmentally friendly valve stem packing with extreme emissions control
  • API 622
  • API 624
  • API 607
  • ISO 15848

Service Limits

Temperature ºF (ºC)
Minimum -400 (-240)
Maximum 850 (455)
Steam 1202 (650)
Pressure psi (bar)
Static 6526 (450)
Minimum 0
Maximum 14

Approximate Yields (+/- 10%)

Size Ft/Lb 87.5 38.2 21.6 14.0 9.7 7.1 5.4 4.3 3.5 2.4 1.8 1.4
Inch 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1
Packaging 1 Lb (0.5kg) 2 Lb (1kg) 5 Lb (2kg) 10 Lb (5kg)
Other sizes are available upon request

Torque calculation

Calculate the torque through the exclusive Teadit® App.

Download Teadit Torque from the Apple Store:

app store badge

App Torque Key

International Approvals* for 2236

Tests conducted by Yarmouth Research and Technology Maine – USA

Fire Test


Qualify packing Style 2236 for fire resistance when applied to valves subjected to direct flame.

Test Procedure



Packing 2236 has successfully completed the test reaching comfortably the requirements of this standard.

Fugitive Emission Test


To qualify packing style 2236 for low fugitive emissions in valves when subjected to thermal and mechanical cycles. Leak detection method "EPA method 21".

Test Parameters

5 thermal cycles at room temperature and up to 260°C. Leak measurements performed before and after each thermal cycle and every 100 cycles of the stem.

Test Pressure: 600 psig (42 Kgf/cm2).


Packing 2236 presents the best results in fugitive emissions control averaging 2 PPMv without any adjustment of the gland and it outperformed all competitors in test performed in the Yarmouth Research and Technology, in Maine/USA, as shown in the graphs below.






Style 2236 Datasheet





10545 Red Bluff Road, Pasadena, TX 77507
Phone: (281) 476-3900 - Fax: 281-476-3999 – TOLL FREE: 800-999-0198

2015© Teadit | All Material Copyright are reserved.


This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.